House Illuminatin for a Street of Houses
This sequence simulates lighting of several houses at night including dusk, night mode and dawn. Additionally a number of street (gas) lamps can be used.
| Order number: ABLST_LIGHT_0011 |
Available: [an error occurred while processing this directive] |
Control: analogue ✓, digital ✓, i.e. push buttons or DCC |
Available as:
[an error occurred while processing this directive]L32, House Illuminatin for a Street of Houses
Decoder L32 with sequence House Illuminatin for a Street of Houses
- Product Contents: L32, with sequence, configured & tested
- Order number: L32+ABLST_LIGHT_0011 Price: 89.00 €
Description
When this sequence is activated 24 independent light outputs will be switched on in a random manner. This simulates house lights in a city in the evening (evening phase). As soon as all outputs are active, single outputs are switched off and on again in a random manner (night phase). When the sequence is deactivated all outputs will be switched off one after another randomly (morning phase).
In addition 8 gas discharge lamps for the street can be operated.
This sequence can be operated and deactivated via switch or DCC command (2 switches/4 DCC commands in total).
Each light output for the house lighting can feed one or more LEDS or lamps. The effects for the street lamps are fine tuned for one or more LEDs per output, so not for lamps.
This sequence uses 24 independent light effect outputs to simulate lighting of several houses at night including dusk, night mode and dawn. All light flows appear in ??? random order.
Additionally 8 street lamps can be used. They have the typical slow switching on behaviour.
You can connect more than one LED/lamp to an output to extend effect of this sequence on your railway layout.
Photos
Video